> ## Documentation Index
> Fetch the complete documentation index at: https://support.essal.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Print Settings Reference

> Essal Access guidance for print Settings Reference.

The **Config** tab in the Print Center controls how badges are laid out on the printed page. This article explains every setting and how it affects the output.

***

## Accessing Print Settings

1. Go to **Print Center** in the sidebar
2. Click the **Config** tab (third tab, after Individual and Bulk)

Changes take effect immediately, the live page preview on the right updates in real-time as you adjust each setting.

***

## Paper Settings

### Paper Size

| Option | Dimensions |
| - | - |
| **A4** | 210 × 297 mm (standard international) |
| **Letter** | 216 × 279 mm (standard US) |

Choose the paper size that matches what you're printing on. This affects how many badges fit per page.

### Orientation

| Option | Description |
| - | - |
| **Portrait** | Tall page (default), fits more rows of badges |
| **Landscape** | Wide page, fits more columns of badges |

For CR80-size badge cards (landscape orientation), **Landscape** page orientation typically gives the most efficient layout.

### Page Margin

Controls the blank border around the entire page before badges begin.

* Range: **0-30 mm**, in 1 mm steps
* Default: **10 mm**
* Reduce this if you want badges closer to the edge (useful when cutting cards manually)
* Increase it if your printer requires a larger non-printable margin

***

## Badge Layout

### Badge Scale

Controls the size of each badge relative to its natural print size.

* Range: **50%-120%**, in 5% steps
* Default: **100%**
* At 100%, a standard CR80 badge prints at its full physical card size (85.6 × 54 mm)
* Reduce to fit more badges per page; increase to fill the page with fewer, larger badges
* The live preview shows the resulting columns × rows count and badges per page

> **Tip**: If a badge at 100% scale doesn't fit correctly with your card stock, reduce to 90% or 95% to add a small safety margin.

### Grid Gap

Controls the spacing between adjacent badges on the page.

* Range: **0-20 mm**, in 1 mm steps
* Default: **5 mm**
* Larger gaps make it easier to cut cards by hand
* Set to 0 mm if using a card cutter with precise registration

***

## Visual Helpers

These settings add guide lines to the printed output to assist with cutting.

### Crop Marks

* Default: **On**
* Adds small L-shaped corner marks at each corner of every badge
* These marks extend outside the badge border so they remain visible after printing even if the badge fills to the edge
* Use crop marks when cutting with scissors or a manual guillotine cutter

### Cut Lines

* Default: **Off**
* Adds a dashed border around the full perimeter of each badge
* More prominent than crop marks, easier to see for hand-cutting
* Can be used alongside crop marks or instead of them

> **For professional cutting**: Crop marks only (no cut lines) are the standard for print shop work. Cut lines are better for in-office cutting where the guide line needs to be visible.

***

## Live Preview

The right side of the Config tab shows a scaled-down preview of the print page with your current settings applied. It displays:

* The badge grid layout (number of columns and rows)
* Sample badge renderings in the grid
* The number of badges per page
* How all settings interact together

The preview is purely visual, it does not use real employee data. Badges show placeholder content.

***

## Settings Summary Table

| Setting | Range | Default | Effect |
| - | - | - | - |
| Paper Size | A4 or Letter | A4 | Page dimensions |
| Orientation | Portrait / Landscape | Portrait | Page rotation |
| Page Margin | 0-30 mm | 10 mm | Border around page |
| Badge Scale | 50-120% | 100% | Badge size relative to card dimensions |
| Grid Gap | 0-20 mm | 5 mm | Space between badges |
| Crop Marks | On / Off | On | Corner cutting guides |
| Cut Lines | On / Off | Off | Full dashed border cutting guide |

## Need help?

If an action is missing, check [your role](https://support.essal.cloud/access/getting-started/understanding-user-roles.md) and the active organization. Use [troubleshooting](https://support.essal.cloud/troubleshooting/common-problems.md) or [contact support](https://support.essal.cloud/introduction/contact.md) with the exact message.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.