> ## Documentation Index
> Fetch the complete documentation index at: https://support.essal.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Managing Devices from the Admin Panel

> Essal Access guidance for managing Devices from the Admin Panel.

**Before you start:** use a device authorized for your organization. Reconnect it to receive recent badge and access-policy changes.

The **Check-In Devices** section in the admin panel gives you full visibility into all registered devices across your facility, and the ability to deactivate or permanently remove them.

***

## The Device List

Each row in the device list shows:

| Column | Description |
| - | - |
| **Status dot** | **Green** = online (seen within the last 5 minutes); **Gray** = offline or stale; **Red** = deactivated |
| **Device name** | The label assigned during setup (e.g. "Main Entrance Tablet") |
| **Location** | The location tag set on the device |
| **Guard name** | The operator name assigned to this device |
| **Last seen** | How long ago the device last sent a heartbeat ("just now", "5m ago", "2h ago") |
| **Deactivated badge** | A red pill shown only when the device has been deactivated by an admin |

***

## Device Actions

Click the **three-dot menu (⋮)** on any device row to access:

### Deactivate

Temporarily prevents the device from scanning. The device receives the deactivation signal on its next heartbeat (within 2 minutes) and is immediately locked with a **Revoked** lock screen. The operator cannot bypass this, they must sign out.

* The device record is retained; no data is lost
* You can **reactivate** the device at any time
* **Use this when:** a device is lost, stolen, or temporarily taken out of service

### Reactivate

Re-enables a previously deactivated device. The device will resume scanning normally on its next heartbeat. The operator may need to tap **Reconnect** on the lock screen.

### Revoke

Permanently removes the device from your organization. The device is deleted from the system, it cannot be reactivated and must be re-registered from scratch if needed again.

* A confirmation dialog is shown before deletion
* All scan logs from the device remain in your **Scan Logs** history
* **Use this when:** a device is permanently decommissioned, replaced, or the app has been reinstalled

***

## Registering a New Device

The top of the Check-In Devices page contains the registration tools:

* **Generate Code**, creates a 6-character one-time code (valid for 15 minutes) that the operator enters during device setup
* **Send Setup Email**, emails a no-expiry registration code and setup instructions to an operator

See the Registering a New Device article for a step-by-step walkthrough.

***

## Monitoring Device Health

The `last seen` timestamp tells you whether each device is actively sending heartbeats:

* **"Just now"** or **"Xm ago" (\< 5 min)**, device is online and operational
* **"Xm ago" (5+ min)**, device may have lost connectivity; check the location
* **"Xh ago"** or a date, device has been offline for an extended period; investigate

A device that has been offline for its configured maximum duration (default 24 hours) will show a lock screen to its operator and require a reconnection before scans can resume.

## Need help?

If an action is missing, check [your role](https://support.essal.cloud/access/getting-started/understanding-user-roles.md) and the active organization. Use [troubleshooting](https://support.essal.cloud/troubleshooting/common-problems.md) or [contact support](https://support.essal.cloud/introduction/contact.md) with the exact message.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.